Import Organization Contact

This feature allows for the importing of Organization Contact information into the Unanet system.  Because there is no unique key that identifies an organization contact, you can insert duplicate entries.  

Note that this import does not support the importing of contact addresses, contact email addresses, or contact phone numbers.  There is minimal validation on the fields in this import.

 

When attempting to Update or Delete existing entries via this import, the system will attempt to match a contact based on the following combination of fields:

 

Roles

This screen is available to users having any of the following roles: Administrator and P&R Administrator.

License

This feature is available with any Unanet edition.

Performance Tip Note:  Depending on the number of users in your installation and other factors such as the overall performance of your platform, the activity of importing one or many files may take up to several minutes.  Should this be the case with your installation, you may want to consider running these processes at non-peak times to minimize database contention.

 

Topics covered on this help page include:


Import File Record Layout

IMPORTANT: Note that there are multiple places within this documentation that say you MUST use double quotes for the strings in your import. If you are working in Excel, Excel will provide the double quotes and thus you do not need to add them in manually. Manually adding double quotes within Excel would result in multiple sets of double quotes in the resulting .csv file and thus cause an error (should you attempt to import that resulting file). Please see Excel Tips for more information.

 

 

 

Field Header Name

Required/Comments

1

A

Organization_Code

ALWAYS REQUIRED.  This code uniquely identifies the Organization to which the contact belongs.  This value must match an existing Project Organization Code value defined in your system.  If the Organization to which you are trying to import does not already exist in the database, the entire record will be rejected.

2

B

Salutation

User's title or salutation such as Mr., Mrs., Dr., Prof, Rev, etc.

Maximum Length: 120 characters

3

C

First_Name

ALWAYS REQUIRED.  This is a person's first name.  

Maximum Length: 50 characters

4

D

Middle_Initial

User's middle initial.

Maximum Length: 1 character

5

E

Last_Name

ALWAYS REQUIRED.  This is a person's last name.  

Maximum Length: 50 characters

6

F

Suffix

User's name suffix such as Jr, Sr, III, etc.

Maximum Length: 10 characters

7

G

Title

User's title such as Program Manager, VP Sales, etc.

Maximum Length: 240 characters

8

H

Comment

Free form text field to capture a comment about this contact.

Maximum Length: 2000 characters

9

I

Active

Valid values include Y or N (if not provided, Y is the default for a new contact).  

A value of Y indicates this contact is Active (that is -- they will appear as available for use in various areas). Otherwise, a value of N indicates this person is no longer active (their data is still in the system and will still be associated in areas where they were already used, but they can no longer be associated for any new purposes).

10

J

Default_Bill_To

Valid values include Y or N (if not provided, N is the default for a new contact).

This field indicates that this contact is to be designated as the default contact when configuring future invoice Bill To contact associations.  Changing this value will have no effect on any existing billing setup.  

Only one Organization Contact can be defined as the Default Bill To contact for the current organization. When designating this contact as the new Default Bill To, the system will remove that designation from any current Default Bill To contact for the Organization.

11

K

Default_Ship_To

Valid values include Y or N (if not provided, N is the default for a new contact).

This field indicates that this contact is to be designated as the default contact when configuring future invoice Ship To contact associations.  Changing this value will have no effect on any existing billing setup.  

Only one Organization Contact can be defined as the Default Ship To contact for the current organization. When designating this contact as the new Default Ship To, the system will remove that designation from any current Default Ship To contact for the Organization.

12

L

Default_Remit_To

Valid values include Y or N (if not provided, N is the default for a new contact).

This field is used to indicate that this contact is to be designated as the default contact when configuring future invoice Remit To contact associations.  Changing this value will have no effect on any existing billing setup.  

Only one Organization Contact can be defined as the Default Remit To contact for the current organization. When designating the current contact as the new Default Remit To, the system will remove that designation from any current Default Remit To contact for the Organization.

13

M

Delete

This field can be used to trigger the system to delete an Organization Contact entry.  

In order for the delete to happen, you must include the following text string !DELETE! in this field.

The record or records deleted will be those that exactly match the following logical key fields:  Organization_Code, First_Name, Middle_Initial, Last_Name and Suffix.

14

N

Contact_Category

This field can contain one to many valid Contact Categories (each must be a valid existing contact category within Unanet).  If any of the categories does not match an existing value in the system, the entire record will be rejected.  

If one or more Contact Categories are listed on a given import record, then any existing Contact Category listed for that contact will be removed and replaced by the new list. If multiple Contact Categories are listed, they must be separated by commas and contained within double quotes  (e.g., Org_Code1, Robert, Smith,"Category1, Category2, Category3").

This field can be blank.  

You can use the special tag !BLANK! to remove all existing entries.

If you would like to add an additional Category to the list without supplying any previously supplied values, you can use the special tag !APPEND!.    "!APPEND!,additional_category,additional_category"  -- this entire string must be enclosed in double quotes (note that if you are working in Excel, Excel will provide the double quotes and thus you do not need to add them in manually).

Similarly, if you would like to remove one or several entries from an existing list, you can use the special tag !REMOVE!.   "!REMOVE!,Category1, Category2"  -- this entire string must be enclosed in double quotes.

See the Excel Tips regarding the use of double quotes and more.

15

O

User01

OPTIONALLY REQUIRED.  Depending on how you have configured the user defined fields in your system, this field may be a Date, Numeric, String or value that matches a Pick List entry.  This field can be left blank if not configured to be required.  You can use the special tag !BLANK! to remove an existing entry in this field.

Maximum Length: 128 characters

Click here for more information about user defined fields for tasks.

16

P

User02

See note for User Defined 1 above

17

Q

User03

See note for User Defined 1 above

18

R

User04

See note for User Defined 1 above

19

S

User05

See note for User Defined 1 above

20

T

User06

See note for User Defined 1 above

21

U

User07

See note for User Defined 1 above

22

V

User08

See note for User Defined 1 above

23

W

User09

See note for User Defined 1 above

24

X

User10

See note for User Defined 1 above

25

Y

User11

See note for User Defined 1 above

26

Z

User12

See note for User Defined 1 above

27

AA

User13

See note for User Defined 1 above

28

AB

User14

See note for User Defined 1 above

29

AC

User15

See note for User Defined 1 above

30

AD

User16

See note for User Defined 1 above

31

AE

User17

See note for User Defined 1 above

32

AF

User18

See note for User Defined 1 above

33

AG

User19

See note for User Defined 1 above

34

AH

User20

See note for User Defined 1 above

 

Note: Check out the Unanet Data Model for specific field data types, lengths, and other attributes.


Import File Format

The file to import must be saved in a comma delimited format.   The fields can be enclosed in double quotes -- which would be particularly necessary should the data being imported contain commas.

Importing a Sub-Set of Columns using a Field Header Record

If you are not using the default column layout sequence as defined above, you must include a header record (prefixed with an asterisk *), containing the column Header Names for those columns you are including in the import file (to indicate what data is contained in each column).  The specific Header Names for each column are listed in the table above.

Example:

*Organization_Code,First_Name, Last_Name,Default_Bill_To
org1,John,Doe,Y


Excel Template

You can create the comma delimited import file with any number of tools.  For those interested in using an Excel spreadsheet to create the file, you can download an Excel Template with predefined headers.    

See the Excel Tips regarding the use of double quotes and more.


Import Screen

The Import Organization Contact screen simply looks like:

Field Descriptions:

Field

Description

Type of Import

Select the appropriate import type from the list of available types of imports.

File to Import

Enter (or browse for) the file that you would like to import.

Output Options

Specify the level of detail included in the output.  

 

The import process is triggered by pressing the Import button.  All Warnings and Error messages are written to the screen and can then be saved if desired.  While some line items may be found invalid and rejected, the remaining line items will be successfully imported and saved in the database.  The rejected line items will be written out to a file on the Unanet server as well as displayed at the bottom of the Import results page. The rejected record file name will be the import name (from the Type of Import drop-down on the Admin>> Import page) , concatenated with a space and "Errors.csv" (e.g., Item - Master Errors.csv, Alternate.csv, etc.). The file will be placed in the Unanet temporary directory (which is defined by the Temp Directory (Fully Qualified Directory Name) (unanet.temp_directory) Unanet property). You can also click on the Download the error file link at the bottom of the Import results page (sample image follows).

 

Related Topics